Showing posts with label do it yourself. Show all posts
Showing posts with label do it yourself. Show all posts

Tuesday, February 7, 2017

DIY Agility Tire

I tackled a quick project tonight as a welcome distraction from all things Molly and lymphoma-worrying....DIY agility tire!

Perri has another USDAA agility trial in less than two weeks and I have no intention of NQing due to tire issues!  Perri and I went to a friend's agility championship celebration party last Saturday and took advantage of the available agility equipment at the party - and made some head way with the tire.   

I really did not want to make a tire frame.   It would have been simple, just some PVC cut to specs and assembled.   But it is one more thing for me to store in my very limited space.  (I just made a pause table, talk about a space-hog!)  

For the tire I got a 10-foot section of drainage piping (in the garden section of the local hardware store.)    I wrestled it into a circle shape and cut the smaller-diameter end with a box cutter, then shoved the small end into the larger end of the piping.   My "tire" was much larger in diameter than I wanted it, but I had done a rough cut just to get it a more manageable shape.   I kept cutting off a few inches of pipe at a time and re-inserting the small end into the large end until I had a 20" diameter.


Yup, that simple.   I could have left it at that but I wanted to decorate it a bit.   I picked up some duct tape in the colors that I wanted, and got to work.


And finally, the lazy-man's agility tire "frame".   I need to get some smaller bungee cords to make latching this thing up onto the jump standards easier but otherwise.... "That'll do, Pig!"

Monday, May 19, 2014

DIY Sunday

1. Fleece Tuggies
I will be working overnight Monday night, and if there are no x-rays, there is not much to do!  I measured, cut strips and tied up four tug toys to be braided during my downtime.  (Hint - the braiding is the easy part as far as I'm concerned!)  Three of these tugs are for coworkers who liked the look of the tug toys I have been making, and one will be a spare for my own dogs.  Can never have too many tugs.
(want to try this yourself?  Check out [ K9DIY: Make a hard core, square braid tug on TeamUnruly.com]

2. Fleece Stuffed Hol-ee Roller
This is a super simple one, and perfect for your de-stuffer dog (Molly, I'm lookin' at you.)  Not so perfect for your fleece swallowing dog (Perri.  I'm lookin' at YOU.)  All you need is a Holee Roller toy (we have three laying around.) and some fleece scraps (I had plenty of, thanks to Project #1.)   And then, you stuff that toy full of the fleece scraps!  [Visit "Leopold's Crate:Fun Activity For Dogs Who Like to Disembowel Their Stuffed Animals" for more details!]

3. Platform Surgery
The platform that I originally made for Perri has been undergoing some intense surgeries since I first created it.   I saw length off the back, the sides.  I saw too much off the side and have to add more.   I recently made Molly a platform with the old half of Perri's platform, but it was not wide or long enough for her to learn on.   Yesterday's project was to simply add some width to both of the girl's platforms.  I had some scrap foam floor tile stashed away from past platform surgeries, so I measured out the width I wanted to add onto each platform and cut four identical strips of that size and duct taped them onto the platform.   I have to wonder if simply making new platforms would be the way to go, but how wasteful would that be of materials?   We don't have the cutest platforms in the world, but they get the job done!
You can see the new attachments on the left of each platform.  Getting out of control with the duct tape is optional - but really really fun!
[(My original DIY Platform post)]

4. Doggie Scratching Post
This was another super easy project that I pulled off the procrastination pile.  I found a piece of scrap board in my garage, bought some sandpaper and duct taped it to the board (again, duct tape!) and got to work with the dogs!   In the future I am going to buy some outdoor stair tread, but I wasn't in the mood to go driving all over the place yesterday for supplies.
Anyway, it was completely fascinating to watch how all three of my very different dogs learned how to do this!  [Check out "Scratching Posts: they aren't just for cats anymore!" on TeamUnruly.com]

Ein caught on the quickest and was the only dog to progress to scraping both paws alternately.  One downside for Ein is that I noticed he was really stiff all over after we worked on this for a little while, but I'm sure we will build rear end strength through this fun exercise as well as getting those claws whittled down.



Next was Molly.   Molly caught on to the scratching really quickly.   She of course started with paw targeting but scratching soon followed.   Weirdly, Molly kept scratching other surfaces rather than the board!   One of those surfaces included me!  Those big paws have a lot of power behind them, it hurt (you can hear my anguished yelp in the video!)  
I tried to see what Molly would do if I laid the board flat.   This was way too much braining.   What on earth could this human be wanting her to do?   She had to settle down in frustration and think about it for a while.   (I stood the board back up, we can try flat when she really has the hang of it.)


And last was Perri.  And she was so very much like Perri.  Tentative.  Little sniff and stress breaks.  She did a lot of scraping just her paw pads on the board, or she would make a claw motion but not actually commit to a scrape.   Very interesting.  She is so different from my other dogs.  "Puppy, just go ahead and take a chance!  Offer a behavior with all your confidence!"   "Nope.   I'm just going to do the bare minimum to make sure I'm on the right track,thankyouverymuch."
Dorky Poodle.

Wednesday, February 5, 2014

DIY Training Platform

For Perri's Precision Heeling class, we need a platform.  Our only experience with long platforms has been in foundation agility class, and that was long ago.  I thought that I would have to have Vince built one out of wood (which he would not be thrilled about, since the house is rapidly filling with an amazing amount of dog training items - and the baby Aframe project is already backlogged.)
I found this video (How to make your own training platform Michele Pouliot style!) upon suggestion on a Facebook group and decided to tackle the project.  What could go wrong?

I really enjoyed making the platform and couldn't find any blog-type directions online, only the video.  So I thought I would write out what I did - with total credit for this brilliant idea to the creator of the video that I linked above, of course!

What You'll Need:

Interlocking Foam Floor Mat Squares 
Duct Tape
Marker
Ruler/Tape Measure
Serrated Bread Knife


When I first watched the video I was like, "Where will I ever find those mats?!  What are they??"
I found them at 5 Below and they cost 2/$5.  They were displayed in the window and I could see them from the parking lot.  Well that was much easier than I thought it would be!  5 Below also had a huge variety of decorative duck tape.  One stop shopping dog platform supplies?  I'll take it!
























Adorable "Duck Tape" close up.

Time to get to work.  I decided to make a 30inch by 10 inch platform for Perri.  The platform should really only be wide enough as the dog's paws are, because the whole point is to train proper position with the aide of the platform.  The length should be, well, the length of the dog.  30 inches is a little long for Perri, but from what I was reading online, too long is better than too short.  And of course, I can always take some length off if this becomes a problem in the future.

The foam squares are 24x24 inches.  I connected them and measured out a length of 30 inches (not including the little locking pieces - which would be cut off.) and then widths of 10 inches.  

Cut cut Cut!
This is about halfway done.  All four pieces need to be cut along the black line and have the puzzle piece nubbies cut off the outside of the squares.  (I got a little over zealous and cut ALL of the nubbies off.  Good I bought an extra square.)
 


Good help is so hard to find.

 
Repeat the process for two more 10x30 sections.

  
Voila!

I stacked my foam pieces two at a time and taped them together where the puzzles seams were.  After that, I taped all four pieces together in a stack.  Lots of tape on the seams, in the middle and at both ends.  Tape tape tape! 




Poodle was placed on top of the platform for modeling purposes only.  Tomorrow we begin working on the fun part, the training!



Monday, December 30, 2013

Expecting a Baby...A-Frame!


Something very exciting is brewing!  Since Husband Vince is never busy with enough (yeah right!), I began the begging process for me and Molly to have our very own baby A-frame built for us.
"Where will we keep it?"
"How big is that going to be!?"
"How much will that cost?"
"Exactly how much dog stuff do you need?!?"

A lot, Vince.  A lot.

And since the year is coming to an end, I thought I would do a little Thank You post to my long suffering husband for all of the things that he has built for us this year!

3 Bar Jumps!
These jumps are in constant use.  I drag them around in the car to places, I even took them camping with us.  I taught Ein the Directed Jump with them.  I do countless handling sequences with Molly.  I have worked hard to build Perri's confidence on jumping with these.  I trained the Recall Over Bar Jump with these.  On and on and on...a bar jump is what any doggie sport girl and her dogs needs and we have three!


6 Weave Poles (Channel-Style)!
Molly, Perri and I practice our weave poles all the time.  Molly needs to learn independent weaving, and Perri needs to learn confidence.  Having a set of poles of our own is a necessary resource for accomplishing our goals.  When it comes to teaching weave poles from the ground up, there is no other method but the channel method in my opinion.
Where are we now?  Molly and I are taking a step back and opening the channel to work on proper entry and independence.  Molly needs to learn that the weave poles are an obstacle that she performs and my body is not involved.
And as for Perri, we need to move her weaving out of my garage.  Step one...weave in the yard.
I cannot imagine not having a set of weave poles to practice on whenever we want!

High Jump!
One of these days, Perri is going to be retrieving the dumbbell.  Over a high jump.  We haven't broken our high jump out much but Vince built a beautiful one for us.  I was impressed by his wood working ability on this project because to my brain, it seemed very difficult!  The times that we did try to work on the high jump, Perri seemed very intimidated by going over the solid jump at 24".  Having a high jump to build her confidence with will be a great start, not to mention the long road to proofing a dumbbell retrieve over this "very intimidating" jump.  


Broad Jump!
This is another of the Open Obedience exercises that will need proofing!  Perri will have to Sit-Stay in front of the broad jump...then take the jump on command...then come to Front.  It will take a lot of practice and I cannot imagine how we could possibly proof the exercise without having a broad jump of our own.  The photo shows the beginnings of our Broad Jump exercise, with a low bar jump in the middle to encourage jumping high and not "ticking" the jump with paws.
(The Broad jump is also seen in agility, so it is good to have one around for that as well.  "Broad jump ticking" is not in Molly's vocabulary, however...)


The A-frame will be a montrosity in size compared to our other goodies, but I am already fantasizing about the good it could do us.  Molly will gain confidence.  I can teach her running contacts and have access to a Frame that I can work her on in as many sessions as I like.  I will of course start with the baby Frame flat and raise it as slowly as I like.  I can teach Molly the "back tunnel" command.  I can practice sequencing with the Frame.   And of course, Perri can only benefit from having an A-frame to practice on!
I have wanted an A-frame for months now and I am so grateful to have Vince...(sort of ) willing to build me a mini A-frame at a fraction of the cost and zero shipping fees.

(And I also need to make a little wobble board for Perri!  And purchase a storage shed with an acre of land to set it all up on.  Oh wait, that's not gonna happen... But the baby A-frame is!)